VALANCE INSTALLATION
31
Aluminum Valance
■
■
Outside mounts and non-flush inside
mounts only:
Use the valance corner end
caps and locks to attach a return to each
end of the valance.
■
➤
Slide the valance corner end cap onto
the valance. Do not hammer the end
cap into the valance — the end cap
will bend.
■
➤
Slide the valance return onto the
corner end cap.
■
➤
Place locks into the circular opening of the valance corner end cap with the prongs
facing out.
■
➤
Use a flat blade screwdriver to turn each lock so that its tab fits into the groove on the
valance and return. This locks the valance and return to the end cap.
Corner End Cap
Locks
Tab
Turn
Tabs in
Grooves
Summary of Contents for Douette PowerView
Page 43: ......
