INSTALLATION – OUTSIDE MOUNT
6
■
■
Drill the screw holes using a
3
/
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall. Use the drill bit size
recommended by the manufacturer.
■
■
Attach the installation or extension brackets using the screws provided.
IMPORTANT:
The front edges of the brackets must be level and aligned to each other.
■
■
If using extension brackets, attach an installation bracket to
the underside of each extension bracket using the provided
screws and speed nuts.
■
■
If using spacer blocks, first attach the installation bracket to the
1
/
2
" spacer block before stacking additional spacer blocks or shims
together.
■
➤
Insert the legs of the installation bracket into the tabs on the
spacer block.
■
➤
Then rotate the installation bracket back.
■
➤
Use a maximum of three spacer blocks (1
1
/
2
") per installation bracket.
IMPORTANT:
For the 1
1
/
2
" pleat size, a minimum
1
/
4
" rear clearance is recommended.
Tab
Summary of Contents for Douette PowerView
Page 43: ......
