OPERATION
28
Basic Operation
1. To wake up the remote, simply pick it up or press
■
STOP. The last group(s) selected will be
highlighted and active.
2. Press “all” or groups 1 – 6 to select specific shade(s) to move. Selected group button(s) will
light to show they are selected.
a. Multiple group buttons may be selected at a time.
b. To deselect a group, press the group button again. The backlight for that group button
will go out.
3. Press
▼
CLOSE to close the selected shade(s).
4. Press
▲
OPEN to open the selected shade(s).
5. Press
■
STOP to stop shade movement anywhere along its travel.
6. While a shade is in motion, press the opposite of shade motion (
▲
OPEN or
▼
CLOSE) to
reverse direction.
7. Press
♥
FAVORITE to send selected shade(s) to your preset “favorite” position. Refer to the
PowerView
™
Motorization Remote Control Guide
on how to set a favorite position.
Further Operation and Programming Information
PowerView Pebble
™
Remote and/or PowerView Surface Remote Operation
For information regarding operation and programming of the PowerView remote, refer to your
PowerView Motorization Remote Control Guide
.
PowerView Scene Controller
For information regarding operation and programming of the PowerView Scene Controller, refer
to your
PowerView Motorization Scene Controller Guide
.
PowerView App Operation
The PowerView Hub is required for PowerView App operation. For information regarding setup
and operation using the PowerView App, refer to the online
PowerView App Software Guide
at
hunterdouglas.com/powerview/support
.
Resetting the Shade (If Necessary)
Basic Reset
The basic reset is used to reset the shade’s travel limits.
1. Press and hold the manual control button for 6 seconds. The shade will move slightly.
2. Release the manual control button. The shade will traverse to its fully open position to set the
open travel limit, then traverse to the fully closed position to set the closed travel limit. The
shade will move slightly one more time to indicate that the travel limits have been reset.
Summary of Contents for Douette PowerView
Page 43: ......
