76
Waypoints
Start Navigation to a Saved Waypoint
If a saved waypoint is within 1/4 mile of the boat position, you can start i-Pilot Link navigation towards it.
CAUTION!
Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the waypoint position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls
).
Start Navigation to the Most Recently Created Waypoint in Chart View
Before proceeding, confirm the cursor is not active.
NOTE:
See
Propeller Controls
for more details about turning the prop on or off and setting the prop speed.
Touch Screen
1. Tap Chart in the status bar. Select Go To.
OR
Tap the Go To button on the X-Press Remote.
2. Select the Waypoint Name. The last waypoint created
is displayed in the menu using the waypoint name.
3. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation:
Tap Chart in the status bar. Select
Go To > Cancel Navigation.
Keypad
1. Press the GO TO key.
2. Select the Waypoint Name. The last waypoint created
is displayed in the menu using the waypoint name.
3. Press the ENTER key.
4. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation:
Press the GO TO key. Select Cancel
Navigation.
