109
Follow the Contour
Follow Bottom Hardness
You can start i-Pilot Link navigation if the boat position is within 1/4 mile of the selected Bottom Hardness layer.
CAUTION!
Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the bottom hardness layer. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls
).
Touch Screen
1. Press and hold a position on the Bottom Hardness
layer.
2. Select Go To > Follow the Contour.
3.
Adjust the Offset (optional):
Select Contour Offset.
Drag the slider, or press and hold the slider.
To remove the offset, set the offset to 0 (off).
4. Select a navigation direction from the submenu.
The navigation direction is previewed in yellow or
purple on the Chart View.
Reverse:
During navigation, tap Chart in the status bar.
Select Go To > Reverse.
Cancel Navigation:
Tap Chart in the status bar. Select
Go To > Cancel Navigation.
Keypad
1. Use the Joystick to move the cursor to a position on
the Bottom Hardness layer.
2. Press the GO TO key.
3. Select Follow the Contour.
4.
Adjust the Offset (optional):
Select Contour Offset.
Turn the Rotary dial, or press and hold the ENTER key.
To remove the offset, set the offset to 0 (off).
5. Select a navigation direction from the submenu.
The navigation direction is previewed in yellow or
purple on the Chart View.
Reverse:
During navigation, press the GO TO key and
select Reverse.
Cancel Navigation:
Press the GO TO key. Select Cancel
Navigation.
Selecting a Navigation Direction to Start Follow Bottom Hardness (SOLIX)
navigation option 1
preview (orange)
navigation
option 1 (orange)
Bottom
Hardness
layer (blue)
navigation
option 2 (purple)
navigation option 2
preview (purple)
