manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

73

Press the MENU key twice to access the Main Menu. Press the RIGHT or LEFT
Cursor keys to select a tab. Then press the DOWN or UP Cursor key to highlight a
menu option, and press the LEFT or RIGHT Cursor key to change a menu setting. 

4-WAY Cursor Control Key 

(LEFT, RIGHT, UP, and DOWN Cursor keys)

The 4-Way Cursor Control key has multiple functions, depending

on the view, menu, or situation. 

•

Menu Selection -

Press the DOWN or UP Cursor keys to highlight a

menu option, then press the RIGHT or LEFT Cursor keys to change a
menu setting. 

NOTE:

Menu settings are implemented and saved immediately - no further action is

required.

•

Freeze Frame -

In Sonar View or Side Imaging® View, press any arrow

on the 4-WAY Cursor Control key to freeze the display and move the
active cursor to a location on the screen. A cursor dialog box will display
to show the depth of the location you choose.

•

Active Cursor -

Press any arrow on the 4-WAY Cursor Control key, and

the active cursor will appear on the screen. In any Chart View, the 4-
WAY Cursor Control key also pans the charts and highlights decluttered
waypoint icons. 

•

Bird’s Eye View -

The 4-WAY Cursor Control key controls the motion of

the eye point. 

•

Snapshot and Recording View

- Press the UP or DOWN Cursor keys to

highlight a recording icon, and then press the Right Cursor key to start
recording playback. Press the Right and Left Cursor keys to control the
speed of playback.

NOTE:

In either Freeze Frame or Active Cursor mode, you can also make the cursor

move diagonally by pressing in between two of the arrows on the 4-WAY Cursor
Control key. 

ombo
ar an

menu

key to

n, or

IGHT

tion.

ce to

. The 

d the

mode. 

then

Menu

menu

ately.

ys.

gs to
stem

iews,

Key Functions 

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 73

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Humminbird Matrix 77 Operation Manual preview
Matrix 77
Brand: Humminbird Pages: 31
Apelco XVC-8100 Instruction Manual preview
XVC-8100
Brand: Apelco Pages: 43

Brands by name

Popular brands

Load more brands