manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

156

Set Map Offset 

(Advanced)

Set Map Offset 

allows you to change the map offset used by your Fishing

System. The Set Map Offset menu option is available when User Mode is set to
Advanced (see 

Main Menu: User Mode

). 

NOTE:

The Map Offset will be applied to all maps and not just the map that requires

the correction. The Map Offset should be cleared if a different map is to be used.

To change the Map Offset setting:

1.  Press the 4-WAY Cursor Control key to activate the cursor and move it

to the location where the Map Offset will be applied.

NOTE: 

The cursor must be active in order for this procedure to work.

2.  Make sure the User Mode is set to Advanced, then highlight Set Map

Offset on the Chart main menu.

3. Press the RIGHT Cursor key to set the Map Offset. The Confirm dialog

box will appear. To confirm the setting, press the RIGHT Cursor key
once more. To cancel the setting, press the LEFT Cursor key.

NOTE:

If the cursor was not active before you began this procedure, an error message

will appear. Exit the menu, set the cursor, then try again.

Clear Map Offset 

(Advanced)

Clear Map Offset 

allows you to clear the Map Offset. The Clear Map Offset

menu option is available when User Mode is set to Advanced (see 

Main Menu:

User Mode

) and a Map Offset is currently active.

To Clear Map Offset:

1.  Make sure the User Mode is set to Advanced, then highlight Clear Map

Offset on the Chart main menu.

2. Press the RIGHT Cursor key to clear the Map Offset.

Set Up Menu Tab

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 156

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Humminbird Matrix 77 Operation Manual preview
Matrix 77
Brand: Humminbird Pages: 31
Lorenz FISH PRO HD+ User Manual preview
FISH PRO HD+
Brand: Lorenz Pages: 37
Navman TRACKFISH 6500 Installation And Operation Manual preview
TRACKFISH 6500
Brand: Navman Pages: 88
Kongsberg Simrad SU90 Series Manual preview
Simrad SU90 Series
Brand: Kongsberg Pages: 34
Kongsberg Simrad MF90 Installation Manual preview
Simrad MF90
Brand: Kongsberg Pages: 426

Brands by name

Popular brands

Load more brands