manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

131

83 kHz Sensitivity 

(Advanced)

83 kHz Sensitivity

changes the sensitivity of the 83 kHz beam. Increasing the

83 kHz Sensitivity will display additional weak returns, and decreasing the 83
kHz Sensitivity will display fewer weak returns. The 83 kHz Sensitivity menu
option is available when User Mode is set to Advanced (see 

Main Menu: User

Mode

). 

NOTE:

83 kHz Sensitivity is particularly useful for adjusting the sensitivity of the 

83 kHz sonar returns in the 200/83kHz Split Sonar View. The 83kHz sensitivity can
be adjusted without affecting the sensitivity of the 200 kHz returns shown in the 
200 kHz sonar window.

To set the 83 kHz Sensitivity:

1.  Make sure the User Mode is set to Advanced, then highlight 83 kHz

Sensitivity on the Sonar main menu.

2.  Press the LEFT or RIGHT Cursor keys to set the 83 kHz Sensitivity. (-10

to +10, Default = 0) 

d to

ay. 

nctive

ation.

ng.

Zoom

ng.

Sonar Menu Tab

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 131

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Navman REPEAT 100 Manual preview
REPEAT 100
Brand: Navman Pages: 11
Raytheon Apelco XVC8100 Instruction Manual preview
Apelco XVC8100
Brand: Raytheon Pages: 43

Brands by name

Popular brands

Load more brands