manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

115

Start Recording 

(optional-purchase MMC/SD Card, Snapshot and

Recording View only)

Start Recording

allows you to start sonar recording from the Snapshot and

Recording View. This menu option is only available when you have an optional-
purchase MMC/SD card installed and you are in Snapshot and Recording View.

To start sonar recording:

1. Highlight Start Recording on the Snapshot and Recording X-Press™

Menu. 

2. Press the RIGHT Cursor key to start recording.

Stop Recording

(optional-purchase MMC/SD Card only)

Stop Recording

allows you to stop sonar recording. This menu option is only

available when you have an optional-purchase MMC/SD card installed.

To stop sonar recording:

1. Highlight Stop Recording from any X-Press™ Menu. 

2. Press the RIGHT Cursor key to stop recording.

Menu

t and

U key

rding
rding 

Snapshot and Recording X-Press™ Menu

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 115

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Alphatron Marine Pro Line FF-901 User Manual preview
Pro Line FF-901
Brand: Alphatron Marine Pages: 96
Navman TRACKFISH 6500 Installation And Operation Manual preview
TRACKFISH 6500
Brand: Navman Pages: 88
Humminbird Wide 3D View Operation Manual preview
Wide 3D View
Brand: Humminbird Pages: 38

Brands by name

Popular brands

Load more brands