manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

65

Add or Remove a Trolling Grid:

The trolling grid shows various distance ranges

in grid format from the waypoint you choose. The trolling grid can be used as a
guide when trolling around a waypoint. 

From the Waypoints submenu, select Grid, and press the RIGHT Cursor key to
display the saved waypoints list. Press the DOWN or UP Cursor keys to
highlight a waypoint, and press the RIGHT Cursor key to select. A trolling grid
centered on the selected waypoint will appear on all of the navigation views.
The grid can be rotated to any heading by adjusting the Grid Rotation setting
on the Navigation Main Menu. To remove the trolling grid, choose Remove Grid
from the Navigation X-Press™ Menu.

NOTE:

Only one waypoint can have either a target or a grid applied to it at one time.

If you apply a target or a grid to a new waypoint, the original waypoint will lose its
target or grid.

NOTE: 

The spacing of the rings on the waypoint target and the spacing of the grid

lines on the trolling grid are the same as the length of the scale bar on the left edge
of the display. Zooming in or out will decrease or increase the spacing, respectively.

Map

Scale

Chart View with Grid

Waypoint
Trolling Grid

nges

key to

et. A

t will

move

Introduction to Navigation 

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:25 PM  Page 65

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Raymarine L760 Quick Reference Card preview
L760
Brand: Raymarine Pages: 2
Samyung SDF-315 Manual preview
SDF-315
Brand: Samyung Pages: 33
AQUASCAN INTERNATIONAL CSE Series Manual preview
CSE Series
Brand: AQUASCAN INTERNATIONAL Pages: 20
Eagle FishStrike 2000 Installation And Operation Instructions Manual preview
FishStrike 2000
Brand: Eagle Pages: 200

Brands by name

Popular brands

Load more brands