manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

Fish I
be di
Selec
when

Fish I
Fish I
as fis

To ch

1. 

2.

Wide
upda
trans

To ch

1. 

2.

RT

128

Fish ID+™

Fish ID+™

uses advanced signal processing to

interpret sonar returns and will display a Fish Symbol when very selective
requirements are met. When a fish is detected, a fish icon and its depth are
displayed above the return that has been classified as being a fish. Three different
fish size icons represent the intensity of the sonar return and provide an indicator
of relative fish size. 

DualBeam PLUS™ 

sonar models represent targets detected in the 200 kHz

narrow beam as Orange Fish Symbols and targets detected in the 83 kHz wide
beam as Blue Fish Symbols. 

When Fish ID+™ is turned off, the Fishing System shows only the raw sonar
returns on the display. These returns will often result in “arches“ forming on the
display, indicating potential targets. Due to the transducer beam angle, the
distance to a fish decreases as the fish moves into the beam, and then
increases as it moves out again, creating a Fish Arch when this distance change
is shown on the display. Boat speed, chart speed, and the position of the fish
within the sonar beam greatly affect the shape of the arch. 

To turn Fish ID+™ on or off:

1.  Highlight Fish ID+ on the Sonar main menu.

2. Press the LEFT or RIGHT Cursor keys to turn the Fish ID+™ setting On or

Off. (Off, On, Default = Off) 

Transducer Cone and Fish Arches

200 kHz, Narrow Beam 

Orange Fish Symbols

83 kHz, Wide Beam 

Blue Fish Symbols 

Sonar Menu Tab

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 128

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Apelco XVA-70 Instruction Manual preview
XVA-70
Brand: Apelco Pages: 36
Garmin STRIKER Vivid 4 Owner'S Manual preview
STRIKER Vivid 4
Brand: Garmin Pages: 41
Raytheon Apelco XVC8100 Instruction Manual preview
Apelco XVC8100
Brand: Raytheon Pages: 43
Garmin GPSMAP 800 Series Installation Instructions Manual preview
GPSMAP 800 Series
Brand: Garmin Pages: 6
PNI Fish Seeker US600 User Manual preview
Fish Seeker US600
Brand: PNI Pages: 88
Hawkeye Mfg FF3350P Instruction Manual preview
FF3350P
Brand: Hawkeye Mfg Pages: 2
Hawkeye Mfg FF3000P Operator'S Manual preview
FF3000P
Brand: Hawkeye Mfg Pages: 2
Hawkeye Mfg FF3355P User Manual preview
FF3355P
Brand: Hawkeye Mfg Pages: 5
Hawkeye Mfg F33P Installation And Operation Manual preview
F33P
Brand: Hawkeye Mfg Pages: 16
Hawkeye Mfg FishTrax 1X Operation Manual preview
FishTrax 1X
Brand: Hawkeye Mfg Pages: 24
Hawkeye Mfg FishTrax FT1PXC Operation Manual preview
FishTrax FT1PXC
Brand: Hawkeye Mfg Pages: 32

Brands by name

Popular brands

Load more brands