manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

Uppe

Sona
menu

User 

and C

To ad

1. 

2. 

100

Sensitivity

Sensitivity

controls how much detail is shown on 

the display and will adjust the sensitivity of all sonar frequencies. Increasing
the sensitivity shows more sonar returns from small baitfish and suspended
debris in the water; however, the display may become too cluttered. 

When operating in very clear water or greater depths, increased sensitivity
shows weaker returns that may be of interest. Decreasing the sensitivity
eliminates the clutter from the display that is sometimes present in murky or
muddy water. If Sensitivity is adjusted too low, the display may not show many
sonar returns that could be fish.

NOTE:

The Sensitivity setting is a global setting and will adjust the sensitivity of all

sonar frequencies, as compared to specific sensitivity adjustments (such as 83 kHz
Sensitivity or  455 kHz Sensitivity) which allow you to adjust the level of sensitivity
for one specific beam at a time.

To adjust the Sensitivity:

1. Highlight Sensitivity on the Sonar X-Press™ Menu.

2. Press the RIGHT or LEFT Cursor keys to increase or decrease the

Sensitivity setting. (Low = 1, High = 20, Default = 10) 

Sensitivity at Low

Sensitivity at Medium

Sensitivity at High

Sonar X-Press™ Menu

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 100

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Icom Marine Commander MXF-5000 Instruction Manual preview
Marine Commander MXF-5000
Brand: Icom Pages: 16
Lowrance HDS-5x Quick Start Manual preview
HDS-5x
Brand: Lowrance Pages: 4
Garmin echo 200 Series Important Safety And Product Information preview
echo 200 Series
Brand: Garmin Pages: 28

Brands by name

Popular brands

Load more brands