manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

177

700 Series™ Fishing System Accessories

Accessories customize the 700 Series™ Fishing System to your needs and
enable you to stay on the edge of new technology. When an accessory is
connected to the 700 Series™ Fishing System, additional menus and readouts
are added automatically to the Main Menu System. Accessories available today
that are supported by your Fishing System include:

QuadraBeam PLUS™ transducer: 

purchase and connect the QuadraBeam

PLUS™ transducer to your 700 Series™ Fishing System to access specialized
QuadraBeam PLUS™ functions such as two 45° fan-shaped 35° 455 kHz Side
Structure locating sonar beams to spot fish, bait and structure to the left and
right of the boat over an area of the bottom that’s always equal to twice your
depth, for a continuous 90° of uninterrupted side to side coverage to 160 feet.  

WeatherSense® Fishing Condition Monitor:

purchase and plug in the

WeatherSense® accessory to your 700 Series™ Fishing System to obtain
barometric pressure readouts and trend data in real time.

GPS Connection Cable: 

purchase the GPS Connection Cable in order to

connect a handheld or other NMEA* GPS-compatible device that you may
already own to your 700 Series™ Fishing System. 

*NMEA 0183 is a National Marine Electronics Association standard for data
communication.

Wireless Sonar Link (WSL):

purchase the Wireless Sonar Link (WSL) accessory

to receive remote sonar signals from a SmartCast® Remote Sonar Sensor (RSS).
Radio signals from the RSS are received by the WSL and transmitted over the
Accessory Bus to the 700 Series™ Fishing System.

PC Connect Cable:

Purchase the PC Connect Cable to connect the 700 Series™

Fishing System to a PC in order to upload product software updates and new
features obtained from 

www.humminbird.com.

This accessory requires the

MSWindows-compatible HumminbirdPC™ software downloaded from our web
site to your PC in order to communicate with the 700 Series™ Fishing System. 

Universal Sonar 2:

Your 700 Series™ Fishing System supports Universal Sonar

2, a state-of-the-art, integrated and protected transducer that is built into the
lower unit of Minnkota trolling motors. With Universal Sonar 2, all wiring is
concealed inside the indestructible composite shaft—out of sight and out of

700 Series™ Fishing System Accessories

eeds,

cause

the

hile

e if

ise

the

tor,

ugs

ter,

nd

ine

use

ted 
hat
the

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 177

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

deeper 4779032950428 Quick Manual preview
4779032950428
Brand: deeper Pages: 16
Haiyang HFF-650 Manual preview
HFF-650
Brand: Haiyang Pages: 53
Garmin Fishfinder 100 Blue Owner'S Manual preview
Fishfinder 100 Blue
Brand: Garmin Pages: 50

Brands by name

Popular brands

Load more brands