manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

163

Aux. Temp. Offset

(Advanced)

Aux. Temp. Offset will adjust the aux. temperature readout (the temperature on
the optional-purchase temperature probe or Temp/Speed accessory) by the
amount entered. This menu option is available when the User Mode is set to
Advanced (see 

Main Menu: User Mode

).

To change the Aux. Temp. Offset setting:

1. Make sure the User Mode is set to Advanced, then highlight Aux.

Temp. Offset on the Setup main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Aux. Temp. Offset

setting. (-10.0 to +10.0 degrees, Default = 0)

Temp. Offset 

(Advanced) 

Temp. Offset 

will adjust the temperature readout by the amount entered. This

menu option is available when the User Mode is set to Advanced (see 

Main

Menu: User Mode

).

To change the Temp. Offset setting:

1.  Make sure the User Mode is set to Advanced, then highlight Temp.

Offset on the Setup main menu.

2.  Press the LEFT or RIGHT Cursor keys to change the Temp. Offset

setting. (-10.0 to +10.0 degrees, Default = 0)

m the

m the

ter a

depth

et to

pth

set

els

Set Up Menu Tab

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 163

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Raytheon V900 Instruction Manual preview
V900
Brand: Raytheon Pages: 90
Topnics TP-CA3082D User Manual preview
TP-CA3082D
Brand: Topnics Pages: 7
deeper PRO Basics preview
PRO
Brand: deeper Pages: 5
Navman Fish 4432 Installation And Operation Manual preview
Fish 4432
Brand: Navman Pages: 37

Brands by name

Popular brands

Load more brands