manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

Stop 

This 
MMC

To st

1.

2.

118

Pings Per Second 

(optional-purchase MMC/SD Card, Snapshot and

Recording View only)

Pings Per Second

allows you to specify the ping rate for an active sonar

recording.

NOTE:

Pings Per Second is available when you have an optional-purchase MMC/SD

card installed, you are in Snapshot and Recording View, and you are actively recording
(not playing back). 

Auto is the default setting for Pings Per Second and automatically adjusts the
ping rate for best recording quality. If there is limited memory on your MMC/SD
card, you can slow the ping rate by setting the Ping Per Second manually, but
the recording will capture less sonar detail. For maximum performance, keep
the Pings Per Second setting on Auto. 

To change Pings Per Second:

1. Highlight Pings Per Second on the Snapshot and Recording X-Press™

Menu. 

2. Press the RIGHT or LEFT Cursor keys to decrease the pings per second

number in the settings bar. (1-10, AUTO, Default = AUTO)

Playback Speed

(optional-purchase MMC/SD Card, Snapshot and

Recording View only)

Playback Speed

allows you to specify the playback speed for a sonar recording

from the Snapshot and Recording View. This menu option is only available
when you have an optional-purchase MMC/SD card installed and you are
playing back a recording.

To specify playback speed:

1. Highlight Playback Speed on the Snapshot and Recording X-Press™

Menu.

2. Press the LEFT or RIGHT Cursor keys to display the following Playback

Speed submenu options which are represented by icons: 

Snapshot and Recording X-Press™ Menu

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 118

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Standard Horizon CP180 Owner'S Manual preview
CP180
Brand: Standard Horizon Pages: 138
Standard Horizon CPF180I Owner'S Manual preview
CPF180I
Brand: Standard Horizon Pages: 166

Brands by name

Popular brands

Load more brands