manualshive.com logo in svg

Humminbird 700 series, Operation Manual

The Cisco 700 series offers an extensive range of network switches and routers designed to provide robust connectivity solutions for businesses of all sizes. Enhance your network capabilities with our high-quality devices. Visit manualshive.com to freely download the Quick Start Manual and user manuals for a seamless installation experience.

Share
Download
background image

159

Units - Speed

Units - Speed

selects the units of measure for speed-

related readouts, and will appear in the menu if a Temp/Speed Accessory is
connected and the paddlewheel has moved at least once, or if the GPS Receiver
is connected. 

To change the Units - Speed setting:

1.  Highlight Units - Speed on the Setup main menu.

2.  Press the LEFT or RIGHT Cursor keys to change the Units - Speed

setting. (Domestic Models: mph, kts; International Models: kph;
Default = mph/kph) 

User Mode

User Mode

sets the menu system to Normal or

Advanced. When set to Normal (default setting), the basic set of menu options
are shown in the menu system. When set to Advanced, additional menu
options are added to the menu system. See 

Main Menu: User Mode

for

details.

To change the User Mode setting:

1.  Highlight User Mode on the Setup main menu.

2.  Press the LEFT or RIGHT Cursor keys to change the User Mode setting.

(Normal, Advanced, Default = Normal)

Language

(International only) 

Language

selects the display language for menus. 

International Models only

. 

To change the Language setting:

1.  Highlight Language on the Setup main menu.

2.  Press the LEFT or RIGHT Cursor keys to change the Language setting.

(Default = English)

or all

pth

els:

outs.

ng.

or all

peed

if the

ce

=

rs,

es,

Set Up Menu Tab

47866_798c-ci_Man_531691-1_F:531519_Eng  10/23/09  2:26 PM  Page 159

Summary of Contents for 700 series



















































































































































































































Reviews:

No comments

Related manuals for 700 series

Navman Datahelm 8120 Installation And Operation Manual preview
Datahelm 8120
Brand: Navman Pages: 90
Amina FD39C Operation Manual preview
FD39C
Brand: Amina Pages: 16

Brands by name

Popular brands

Load more brands