Humbaur 7000 Series Operating Instruction Download

Page: 61 / 100

Foal grid (optional)

Operating the body

MACHT’S MÖGLICH

Fig. 60

Foal grid with deflector / roll-up tarpaulin



Pull the deflector / roll-up tarpaulin over the foal grid -
see page 57.

Fold down the foal grid

Fig. 61

Unlock and fold down the foal grid

Securing pin



Open the deflector / roll-up tarpaulin - see page 56.



Hold the foal grid.



Unlocking of the safety bolts (Fig. 61 /1).



Fold the foal grid downwards.

Fig. 62

Secure the foal grid

Clamping bracket



Press the foal grid into the clamping bracket (Fig. 62 /1).



Lock the safety bolts.



Close the deflector / roll-up tarpaulin - see page 57.

Fig. 63

Foal grid folded down and secured

A - 060

A - 061

A - 062

A - 063

Summary of Contents for 7000 Series





































































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

Humbaur 7000 Series, Operating Instruction

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands