manualshive.com logo in svg

Humbaur 7000 Series, Operating Instruction, Page: 25 / 100

Share
Download
Humbaur 7000 Series Operating Instruction Download Page 25

Safety first!

25

Operation

3

MACHT’S MÖGLICH

Driving in a car and trailer combination with 
horses

Fig. 1

Driving in car and trailer combinations (example image)

Take note of the safety / driving instructions for 
driving with the towing vehicle and trailer stated in 
the operating instruction manual 
"Trailers up to 3.5 to" - General - Part 1.

Fig. 2

Driving in car and trailer combinations (example image)

Carry out a departure check
(see operating instruction manual, “Trailers up to 3.5 to”
(General Points - Part 1).

Drive particularly carefully when transporting horses and 
look ahead.

Adapt your driving style to the road and 
weather conditions!

Reduce your speed and drive particularly carefully 
around bends and when turning!

Start braking processes smoothly (not suddenly) 

Stop immediately if the horse starts to jump around in the 
trailer.

Driving at 100 km / h 

Fig. 3

Maximum speed / 100 km / h sticker

Your trailer can be licensed for a top speed of 
100 km / h. 

For this, several conditions must be fulfilled.
- For information, see www.humbaur.com / Interesting facts

Have any missing wheel shock absorbers retrofitted to 
the trailer.

B - 001  

B - 002  

B - 003  

Summary of Contents for 7000 Series





































































































Reviews:

No comments