Humbaur 7000 Series Operating Instruction Download Page 73

Page: 73 / 100

Sliding window (Notos PLUS)

Operating the body

MACHT’S MÖGLICH

Sliding window (Notos PLUS)

Fig. 102

Sliding window

Sliding window closed

Sliding window open

The windows can optionally be installed as sliding windows
for good ventilation while parking.
Operation is only possible from the inside

Open the sliding window

Fig. 103

Open the sliding window

Handle



Push the handle (Fig. 103 /1) together.
The sliding window is unlocked.



Hold the window handle and slide the window open.

Fig. 104

open

Closing the sliding window

Fig. 105

Closing the sliding window



Hold the window handle and slide the window closed.

Fig. 106

locked

The handle must engage.

A - 102

A - 103

A - 104

A - 105

A - 106

Summary of Contents for 7000 Series





































































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

Humbaur 7000 Series, Operating Instruction

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands