manualshive.com logo in svg

Humbaur 7000 Series, Operating Instruction

Share
Download
Humbaur 7000 Series Operating Instruction Download Page 9

Use

9

Safety

1

MACHT’S MÖGLICH

Disclaimer

Any liability of the manufacturer becomes null and void if:

– the trailer and its components are altered without 

authorization.

– the original parts or conversion parts / accessories 

approved by Humbaur GmbH are replaced by other 
components.

– retrospective changes have been made to the trailer 

(e.g. new drill holes in the frame or the reboring of 
existing drill holes in the frame). This is considered by 
Humbaur GmbH to be a structural change, and the type 
approval therefore becomes null and void.

– non-approved accessories or third-party spare / 

component parts which are not original HUMBAUR 
parts are attached or installed. The type approval of the 
trailer, possibly even the insurance cover, becomes null 
and void.

– care and maintenance intervals prescribed by the 

manufacturer are not complied with.

Any risks and liability exclusions resulting from this also 
exist if: 

– Acceptance inspections have been carried out by 

inspectors / authorised experts of the technical 
inspection authorities or officially recognised 
organisations.

– Official approvals are available.

Summary of Contents for 7000 Series





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands