manualshive.com logo in svg

Humbaur 7000 Series, Operating Instruction

Share
Download
Humbaur 7000 Series Operating Instruction Download Page 67

Tailgate

67

Operating the body

5

MACHT’S MÖGLICH

Fig. 79

Releasing the plug pin lock

1

R-clip

2

Lock

3

Plug pin

Remove the R-clip (Fig. 79 /1) from the
plug pin (Fig. 79 /3).

Remove the plug pin from the revolving door
lock (Fig. 79 /2).

Keep the plug pin in a safe place.

Fig. 80

Unlock the locking bolt lock (Spirit, Balios)

1

Plunger pins

2

Securing pins

3

Locking bolt

Pull the locking bolt (Fig. 80 /3).

Turn the locking bold by 90° downwards and lock the 
safety pins (Fig. 80 /2) behind the latching
pins (Fig. 80 /1).
The revolving door is now unlocked at the bottom.

Fig. 81

Swivel out revolving door / open

1

Handle

Unlock the left angle leaver lock - see page 44.

Grip the handle (Fig. 81 /1) of the revolving door.

Swivel the revolving door to open it - up to the limit stop.

Hold the revolving door with your hand or secure it 
against unintentional slamming.

A - 079

1

2

3

A - 080

1

2

3

A - 081  

1

Summary of Contents for 7000 Series





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands