Humbaur 7000 Series Operating Instruction Download

Page: 69 / 100

Vent window

Operating the body

MACHT’S MÖGLICH

Operating the vent window

Fig. 86

Vent window open on both sides

The vent windows are used for fresh air supply during
parking and while driving.
The vent windows can be opened in 5 positions.

CAUTION

Operating the vent window

Risk of crushing your hands / fingers when opening
or closing the vent windows.



Carefully operate the vent windows.

- Pull it towards you with one hand.
- Only operate one handle at a time - not both.

NOTICE

Vent window open

Water / rain may penetrate to the inside and cause humidity
damage if the window is open.



Close the vent windows in bad weather.

Fig. 87

Risk of collision

NOTICE

Opening the access door with opened vent window!

The vent window knocks against the body of the trailer and
may get damaged.



Close the vent window before opening the access door.

Vent windows Positions

Fig. 88

closed / open in parallel

Fig. 89

folded upwards / folded downwards

Fig. 90

open towards the back / towards the front

A - 086

A - 087

A - 088

A - 089

A - 090

Summary of Contents for 7000 Series





































































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

Humbaur 7000 Series, Operating Instruction

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands