manualshive.com logo in svg

Humbaur 7000 Series, Operating Instruction

Share
Download
Humbaur 7000 Series Operating Instruction Download Page 66

Tailgate

5

66

Operating the body

MACHT’S MÖGLICH

Fig. 77

Tailgate closed and secured

Lock the angle lever locks - see page 44.

Close the deflector / roll-up tarpaulin - see page 57.

Swivel open the revolving door

WARNING

Swivelling open the revolving door

After unlocking, the revolving door can fold
open or fold down in an uncontrolled manner
- impact / crushing risk!

Use , .

 Keep persons out of the swivelling range of the 

tailgate.

Stick to the sequence for unlocking the revolving door - 

see sticker.

Never unlock both angle lever locks.

Hold the revolving door with one hand.

Fig. 78

Revolving door

1

Plug pin lock

2

Hinge

3

Handle

4

Angle lever lock

NOTICE 

Overextending the revolving door

The hinges of the revolving door and the lamps at the rear 
support can get damaged.

Only swivel the revolving door up to the limit stop or as 

far as this can be done without damaging components.

The angle leaver lock at the hinge side remains 
closed.

The revolving door does not have a door holder.
The revolving door must be secured against falling 
shut!

A - 077

620.00403_A

3

2

1

A - 078

A

1

2

3

4

Summary of Contents for 7000 Series





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands