Humbaur 7000 Series Operating Instruction Download Page 63

Page: 63 / 100

Rotary flaps (Notos ALU / PLUS) (optional)

Operating the body

MACHT’S MÖGLICH

Fig. 67

Secure the rotary flap

Locking bolt

Securing bracket



Pull up the locking bolt (Fig. 67 /1).



Turn the locking bolt / handle by 90°.



Let the locking bolt snap into the eyelet of the safety
bracket (Fig. 67 /2) by pressing it upwards as required.
The rotary flap is secured against unintentional
slamming.

Closing the rotary flaps

Fig. 68

Close the rotary flap

Securing bracket

Locking bolt

Rotary flap (left)



Remove the latch pin (Fig. 68 /2) from the safety
bracket (Fig. 68 /1).



Close the left rotary flap (Fig. 68 /3).



Unlock and close the right rotary flap.

Fig. 69

Rotary flaps closed and secured

Rotary flap (left)

Rotary flap (right)



Press the left rotary flap (Fig. 69 /1) towards the body
and close the right rotary flap (Fig. 69 /2).



Lock the rotary handle - see page 44.

A - 067

A - 068

A - 069

Summary of Contents for 7000 Series





































































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

Humbaur 7000 Series, Operating Instruction

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands