manualshive.com logo in svg

Humbaur 7000 Series, Operating Instruction

Share
Download
Humbaur 7000 Series Operating Instruction Download Page 45

5

Door holder

45

Operating the body

MACHT’S MÖGLICH

Operating the door holder

Fig. 5

Door holder overview

1

Nipple (for pressing in or latching)

2

Bush

3

Holding lever (to hook in)

4

Locking sleeve

The door holder secures the access door / saddle 
compartment door / flaps against autonomous falling shut. 
The mechanisms vary between pressing-in, latching or 
hooking-in, depending on the model.

The access door / saddle compartment door / flaps 
must be secured with a door holder against falling 
shut. 

The doors / flaps must also be held by hand when the wind 
is strong!

Door holder to press in / snap in

Fig. 6

Press-in door holder

1

Nipple

2

Bush

Locking

Press the door / flap towards the body until the nipple 
(Fig. 6 /1) has latched in the socket (Fig. 6 /2).

Releasing

Pull on the door / flap with some force.
The door holder unlatches from the lock.

The door / flap can be closed.

Door holder for hooking-in

Fig. 7

Door holder secured

1

Locking lever

2

Locking sleeve

Locking

Swivel the locking lever (Fig. 7 /1) towards the locking 
sleeve (Fig. 7 /2).

Guide the locking lever into the locking sleeve.

Press the locking lever inwards and up to the limit stop.

Unlocking

Pull the locking lever towards yourself.

Slide the locking lever out of the locking sleeve.

Release the locking lever.
The door / flap can be closed.

A - 005

2

1

4

3

A - 006

1

2

A - 007

1

2

Summary of Contents for 7000 Series





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands