manualshive.com logo in svg

Humbaur 7000 Series, Operating Instruction

Share
Download
Humbaur 7000 Series Operating Instruction Download Page 60

5

Foal grid (optional)

60

Operating the body

MACHT’S MÖGLICH

Operating the foal grid

Fig. 56

Foal grid

1

Securing pin

2

Foal grid (folded down)

3

Clamping bracket

The foal grid prevents small / young horses or foals from 
jumping out of the trailer.

WARNING

Unsecured foal grid

The foal grid may unintentionally come open loose while 
driving and fold down - accident risk!
The foal may jump out!

Make sure that the foal grid is closed and secured with 

the safety bolt before driving off.

Folding up the foal grid

Fig. 57

Unlocking the foal grid

1

Securing pin

2

Holes

Open the deflector / roll-up tarpaulin - see page 56.

Pull the safety bolt (Fig. 57 /1) downwards.
- The safety bolt will fall out of the hole (Fig. 57 /2).

Fig. 58

Folding up the foal grid

1

Securing pin

2

Clamping bracket

Pull the foal grid out of the clamping bracket (Fig. 58 /2).

Fold the foal grid upwards and hold it.

Lock the foal grid with the safety bolt (Fig. 58 /1).

Fig. 59

Foal grid folded up and secured

A - 056 

1

2

3

A - 057

1

2

2

A - 058

1

2

A - 059 

Summary of Contents for 7000 Series





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands