Humbaur 7000 Series Operating Instruction Download

Page: 57 / 100

Deflector / roll-up tarpaulin

Operating the body

MACHT’S MÖGLICH

Fig. 45

Roll up the deflector / roll-up tarpaulin



Climb onto the step.
- Grip the tailgate.



Pull the deflector / roll-up tarpaulin up to the polyester
roof.
- Ensure that the deflector / roll-up tarpaulin rolls up
properly.

Fig. 46

Deflector / roll-up tarpaulin rolled up

Closing the deflector / roll-up tarpaulin

Fig. 47

Pull down the deflector / roll-up tarpaulin



Climb onto the step.
- Grip the tailgate.



Slowly pull the middle elastic cord fastener downwards.
- Ensure that the deflector / roll-up tarpaulin rolls down
properly.

Fig. 48

Closing the deflector / roll-up tarpaulin

Elastic cord fastener

Round button



Pull the elastic cord fasteners (Fig. 48 /1) over the
round buttons (Fig. 48 /2).

Fig. 49

Deflector / roll-up tarpaulin closed

A - 045

A - 046

A - 047

A - 048

A - 049

Summary of Contents for 7000 Series





































































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

Humbaur 7000 Series, Operating Instruction

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands