Humbaur 7000 Series Operating Instruction Download Page 15

Page: 15 / 100

Product description

General information

MACHT’S MÖGLICH

Aluminium-polyester class

Fig. 11

Single ALU

One-horse transport
Full-length breast and breech bar
with saddle compartment
with Windschott (deflector)

Fig. 12

Xanthos SPIRIT

without saddle compartment
without deflector
without wheel shock absorber (100 km/h)

Fig. 13

Xanthos

with AluBiComp floor
without saddle compartment
with deflector
with automatic support wheel
with wheel shock absorber (100 km/h)

Fig. 14

Xanthos AERO

with saddle compartment
with Windschott (deflector)
with wheel shock absorber (100 km/h)

Fig. 15

Notos ALU

Rotating centre-post partition wall
Rotating hinge-mounted tailgate
Divided revolving / swivel front exit
with wheel shock absorber (100 km/h)

I - 011

I - 01

I - 012

I - 013

I - 014

I - 015

Summary of Contents for 7000 Series





































































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

Humbaur 7000 Series, Operating Instruction

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands