Hudson 1948 - 1952, Service Manual

Page: 3 / 333

FORWARD
The information contained herein is to be used as a
guide and reference for servicing Hudson Motor Cars.
A group index and an alphabetical index is placed in
the front of the manual for easy reference and each
section is self-contained.
The procedures outlined herein are derived from the
procedures established in preparing flat rate time
schedules.
A thorough study of the operations necessary tools
and equipment will enable the Hudson Service dealer
to perform reliable service at reasonable cost.
Special tools that have been developed are shown in
their respective positions.
New Tools are developed only when it is found to be
essential to good workmanship and the time saving is
sufficient to warrant the cost of manufacturing.
Tools are developed in conjunction with the Kent
Moore Organization and are sold by them direct to
Hudson Distributors and Dealers.
GROUP INDEX
SECTION SECTION
1. LUBRICATION
2. ENGINE TUNE-UP
3. ENGINE
4. FUEL
5. COOLING
6. ELECTRICAL
7. CLUTCH
8. TRANSMISSION
9. OVER-DRIVE
10. PROPELLER SHAFT
11. REAR AXLE
12. FRONT SUSPENSION
13. STEERING GEAR
14. SPRINGS , SHOCK ABSORBERS, AND
STABILIZERS
15. BRAKES
16. WHEELS AND TIRES
I