Huber KISS 1 Series, Operation Manual

Page: 31 / 56

Function description
Chapter 3 OPERATION MANUAL
V1.2.0en/11.12.20//0.3.1
KISS Immersion Circulator
31
Designation Description
Temperature limit for setpoint
Display of the setpoint limit. You can set the setpoint only within this range.
You can change this limit in the menu item “Protection Options” and then
“Setpoint Minimum” and “Setpoint Maximum". Do take the thermal fluid
used and the material to be tempered into account when changing these
settings. See also on page 33, section »Menu function« .
Flow sensor / pressure sensor
(optional, depending on model)
Display for the measured values of the built-in flow or pressure sensor.
This feature is optional depending on the model and is not available in KISS
controllers and other temperature control units.
Use the menu item “Sensor Configuration” under “Flow Sensor / Pressure
Sensor Display” to change the display or to turn it on and off. See also on
page 33, section »Menu function« .
Heater
This symbol is displayed when the temperature control unit heats the
thermal fluid. (Only for temperature control units with heating)
Cooling system
This symbol is displayed when the temperature control unit cools down the
thermal fluid.
Pump
The symbol is displayed when the pump in the temperature control unit
runs.
Current internal temperature
Display of the current thermal fluid temperature. The temperature is meas-
ured and controlled by the internal temperature sensor.
Pt100 sensor
(optional)
Displays the measured value of the external Pt100 process display sensor.
This display requires that:
1) the temperature control unit is equipped with a Pt100 port,
2) a Pt100 process display sensor has been attached,
3) the Pt100 process display sensor was placed in the application.
You can turn on and off the display in the menu item “Sensor Configura-
tion” under “Display external Pt100 sensor” only if the corresponding
interface has been installed. See also on page 33, section »Menu function« .
Adjusted setpoint Displays the setpoint set.
Info text or error message Displays an info text or error message.
3.4.2 Control instruments
3.4.2.1 Arrow keys
Use the >Arrow keys< [B] to enter values ( (+) or (-)), to select a menu item ( (arrow left) or
(arrow right)) or to select a different menu item ( (up) or (down)). Pressing an arrow key for
an extended period changes a value faster. Pressing both >Arrow keys< [B] simultaneously calls up
the main menu.
3.4.2.2 SET key
Pressing the >SET key< [C] on the home screen switches directly to the screen where you can enter
the setpoint temperature. It allows you to quickly modify the setpoint temperature. The >SET key<
[C] is also used to get to a selected menu item or to confirm changes.
Home screen:
Explanation of the
display