Huber KISS 1 Series, Operation Manual

Page: 20 / 56

Commissioning
OPERATION MANUAL Chapter 2
KISS Immersion Circulator
V1.2.0en/11.12.20//0.3.1
20
▪ The leveling feet can only be mounted while the temperature control unit is lifted.
▪ Secure the temperature control unit against slipping and/or lowering.
▪ Do not stand or lie under the temperature control unit while mounting the leveling feet.
▪ Do not lower the temperature control unit until all leveling feet have been mounted.
2.1.3 Positioning the temperature control unit
2.1.3.1 Temperature control unit with casters
▪
Do
not
use the casters for transportation to the place of installation. Observe page 18, section
»Lifting and transporting the temperature control unit«
for the transport to the place of installa-
tion.
▪ Use the rollers only for positioning at the place of installation.
▪
Only ever move the temperature control unit on casters if the surface is level, without a gradient,
non-slip and stable.
▪ Do not move the temperature control unit alone.
▪ At least 2 persons
are required to move the temperature control unit on casters.
At least 5 per-
sons
are required to move the temperature control unit on casters if the total weight of the tem-
perature control unit is
over 1.5 tons
.
▪ The parking brakes must be activated at the casters and/or the leveling feet (if any) must be un-
screwed/activated before the temperature control unit is put into operation (see page 25, section
»Unscrewing/activating the leveling feet (if any)« ).
2.1.3.2 Temperature control unit without casters
▪
An industrial truck must be used for positioning the temperature control unit.
▪ Do not move the temperature control unit alone.
▪ At least 2 persons
are required to move the temperature control unit.
▪ The industrial truck must have a lifting force equal to or greater than the weight of the tempera-
ture control unit. See the data sheet (from page 58 in section »Annex« ) for the weight of the
temperature control unit.
▪
The leveling feet (if any) must be unscrewed/activated before the temperature control unit is put
into operation (see page 25, section
»Unscrewing/activating the leveling feet (if any)«
).
2.2 Unpacking
Starting up a damaged temperature control unit
MORTAL DANGER FROM ELECTRIC SHOCK

Do not operate a damaged temperature control unit.

Please contact the Customer Support. The telephone number can be found on page 57, section
»Contact data« .
PROCEDURE

Check for damage to the packaging. Damage can indicate property damage to the temperature
control unit.

Check for any transport damage when unpacking the temperature control unit.

Always contact your forwarding agent regarding the settlement of claims.

Follow the instructions for the disposal of packaging material on page 15 section »Proper dis-
posal of resources and consumables« .
2.3 Ambient conditions
Unsuitable ambient conditions/unsuitable installation
SERIOUS INJURY DUE TO CRUSHING

Comply with the requirements under sections »Ambient conditions« and »Installation condi-
tions« .