Huber KISS 1 Series, Operation Manual

Page: 27 / 56

Commissioning
Chapter 2 OPERATION MANUAL
V1.2.0en/11.12.20//0.3.1
KISS Immersion Circulator
27
2.11.1 Connection using socket with protective earth (PE)
Connecting to a power socket without protective earth (PE)
MORTAL DANGER FROM ELECTRIC SHOCK

Always connect the temperature control unit to safety sockets (PE).
Damaged power cable/power cable connection
MORTAL DANGER FROM ELECTRIC SHOCK

Do not start up the temperature control unit.

Isolate the temperature control unit from the power supply.

Have the power supply cable/power supply connection replaced and inspected by an electri-
cian.

Do not use a power cable that is longer than
3 m
.
Incorrect power supply connection
DAMAGE TO THE TEMPERATURE CONTROL UNIT

Your building's existing power supply voltage and frequency must match the data provided on
the rating plate of the temperature control unit.
In case of uncertainties about an existing protective earth (PE), have the connection inspected by
an electrician.
2.11.2 Connection via hard wiring
Connection/adjustment to the power supply not carried out by an electrician
MORTAL DANGER FROM ELECTRIC SHOCK

Have the connection/adjustment to the power supply carried out by an electrician.
Damaged power cable/power cable connection
MORTAL DANGER FROM ELECTRIC SHOCK

Do not start up the temperature control unit.

Isolate the temperature control unit from the power supply.

Have the power supply cable/power supply connection replaced and inspected by an electri-
cian.

Do not use a power cable that is longer than
3 m
.
Incorrect power supply connection
DAMAGE TO THE TEMPERATURE CONTROL UNIT

Your building's existing power supply voltage and frequency must match the data provided on
the rating plate of the temperature control unit.