Huawei UPS5000-H-400 kVA User Manual Download Page 3

Page: 3 / 175

About This Document

Purpose

This document describes the UPS in terms of its features, performance

specifications, working principles, appearance, structure, installation, and

operation and maintenance (O&M).

The figures provided in this document are for reference only.

Intended Audience

This document is intended for:

●

Sales engineers

●

Technical support engineers

●

System engineers

●

Hardware installation engineers

●

Commissioning engineers

●

Data configuration engineers

●

Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if

not avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which,

if not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if

not avoided, could result in minor or moderate injury.

UPS5000-H-(400 kVA-800 kVA)

User Manual (100 kVA Power Module)

About This Document

Issue 02 (2021-04-22)

Summary of Contents for UPS5000-H-400 kVA
















































































































































































Search results

Summary of Contents for UPS5000-H-400 kVA

Reviews:

Related manuals for UPS5000-H-400 kVA

Brands by name

Popular brands

Huawei UPS5000-H-400 kVA, User Manual

Search results

Summary of Contents for UPS5000-H-400 kVA

Reviews:

Related manuals for UPS5000-H-400 kVA

Brands by name

Popular brands