Huawei UPS5000-E-400K-FMS, User Manual

Page: 156 / 224

UPS5000-E-(400 kVA-600 kVA)
User Manual (60 kVA Power Modules)
4 User Interface
Issue 05 (2019-12-24) Copyright © Huawei Technologies Co., Ltd. 148

Set Email and Alarm Severity and simulate an alarm. Check that the alarm email can be
received. Configure Alarm Notification Email Address is used to configure the email
address for receiving alarm emails from the monitoring system.

ModbusTCP Certificate Management : ModbusTCP supports the Transport Layer
Security (TLS) secure protocol for encrypted transmission and implements access
authentication through the bidirectional certificate. Customers can replace the UPS
certificate with the certificate trusted by them.

ModbusTCP CA Certificate Management : Import a CA certificate to verify the
validity of the ModbusTCP access certificate.

ModbusTCP Authentication : Verify the identity legitimacy of both parties to ensure
data security for both parties in ModbusTCP communication.

After eUPS certificate management is configured, a certificate can be imported on the
WebUI to replace the preset eUPS certificate.
4.2.4.3 RCCMD
RCCMD
RCCMD function is set to Disable by default, as shown in Figure 4-54 . If required, set it to
Enable upon first login. After you submit the setting, the page refreshes. The controls such as
SSL Encrypted Transmission and Event Configuration will be displayed on the page, as
shown in Figure 4-55 .
Figure 4-54 RCCMD function disabled