4.4 (Optional) Setting Teamwork Parameters
Procedure
Step 1 Determine the positions of the master unit and slave unit based on the site
situation.
Step 2 Choose Teamwork Setting from the user menu, and tap
to access the
teamwork setting screen.
Figure 4-9 Teamwork setting
NO TE
If the teamwork function is enabled and the unit address is set to 1 (master unit), the menus on
the last two screens are viewable and configurable. Otherwise, the last two screens are not
displayed.
Step 3 Set Teamwork Function to Enable.
Step 4 Set the Unit Address of the master unit to 1 and the Unit Address of the slave
unit to an integer other than 1.
Step 5 Set other parameters based on the following table.
NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
4 Power-On Commissioning
Issue 02 (2020-11-09)
Copyright © Huawei Technologies Co., Ltd.
69
