Huawei FusionServer Pro CH121 V5 User Manual Download Page 48

Page: 48 / 181

Step 7

Place the removed component in an ESD bag.

----End

3.10 Installing the PCIe Card Panel

Procedure

Step 1

Power off the compute node.

For details, see

3.1 Power-Off Procedure

Step 2

Remove the compute node.

For details, see

3.3 Removing a CH121 V5

Step 3

Place the compute node on the ESD workstation.

Step 4

Remove the cover.

For details, see

3.5 Removing the Cover

Step 5

Check whether a PCIe card is installed.

If yes, go to

Step 6

If no, go to

Step 7

Step 6

Remove the PCIe card.

For details, see

3.11 Removing a PCIe Card

Step 7

Take the spare part out of its ESD bag.

Step 8

Determine the position of the PCIe card panel.

Step 9

Install the PCIe card panel.

Vertically slide the PCIe card panel into the slot, and align the screw holes on the PCIe
card panel with those on the pane. See (1) in

Figure 3-16

Tighten the two screws to secure the PCIe card panel. See (2) in

Figure 3-16

FusionServer Pro CH121 V5 Compute Node
User Guide

3 Basic Operations

Issue 06 (2019-08-10)

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands