12.5 Logging In to a Compute Node Using MM910 SOL
Scenarios
Access a compute node in an E9000 server using the SOL function provided by the MM910.
Only one serial port connection can be set up by using SOL at a time. Therefore, you are
advised to exit the SOL screen after operation.
Procedure
Step 1
Log in to the MM910 CLI by using an SSH tool and the floating IP address of the MM910.
PuTTY is used as an example. For details, see
12.8.1 Logging In to the CLI Using PuTTY
.
Step 2
Log in to the SOL CLI.
telnet 0 1101
The command output is as follows:
*=====================================================================*
* Welcome to SMM SOL Server *
* Please log in with SMM account and password. *
*=====================================================================*
user name:
Step 3
Enter the user name and password.
NOTE
The default user name of compute nodes is
Administrator
, and the default password is
Admin@9000
.
The CLI for selecting a slot is displayed.
Log in Success!
*=================================================================================
==========================
please input the SOL Blade1~Blade16(1 ~ 16), Blade1A~Blade16A(17 ~ 32),
Swi1~Swi4(33 ~ 36) and COM#(n)
press Ctrl+R to return
*=================================================================================
==========================
Blade1~Blade16(1 ~ 16)
Blade1A~Blade16A(17 ~ 32)
Swi1~Swi4(33 ~ 36)
Please input your choice:
The numbers in the preceding information are described as follows:
l
1
to
32
indicate the compute nodes in slots 1 to 32, respectively.
l
33
to
36
indicate the switch modules in slots 1E, 2X, 3X, and 4E, respectively.
FusionServer Pro CH121 V5 Compute Node
User Guide
12 Common Operations
Issue 06 (2019-08-10)
Copyright © Huawei Technologies Co., Ltd.
145
