manualshive.com logo in svg

Huawei FusionServer Pro CH121 V5, User Manual, Page: 103 / 181

Share
Download
Huawei FusionServer Pro CH121 V5 User Manual Download Page 103

Step 5

Check the indicator status of the M.2 FRU.

For details, see 

M.2 FRU Indicators

.

----End

5.2.2 Installing the Screw-in RAID Controller Card

Step 1

Power off the compute node.

For details, see 

3.1 Power-Off Procedure

.

Step 2

Remove the compute node.

For details, see 

3.3 Removing a CH121 V5

.

Step 3

Place the compute node on the ESD workstation.

Step 4

Remove the cover.

For details, see 

3.5 Removing the Cover

.

Step 5

Check whether a PCIe card is installed.

l

If yes, go to 

Step 6

.

l

If no, go to 

Step 7

.

Step 6

Remove the PCIe card.

For details, see 

3.11 Removing a PCIe Card

.

Step 7

Take the spare part out of its ESD bag.

Step 8

Determine the position of the screw-in RAID controller card.

Figure 5-3

 Position of the screw-in RAID controller card

FusionServer Pro CH121 V5 Compute Node
User Guide

5 Optional Part Installation

Issue 06 (2019-08-10)

Copyright © Huawei Technologies Co., Ltd.

95

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Reviews:

No comments