Huawei FusionServer Pro CH121 V5 User Manual Download Page 64

Page: 64 / 181

If no, rectify the drive fault.

Step 4

Configure kernel parameters.

/boot/efi/EFI/redhat/grub.cfg

(if the OS is installed in UEFI

mode) or

/boot/grub2/grub.cfg

(if the OS is installed in legacy mode).

If RHEL 7.3 is installed in UEFI mode:

Run the

cat /proc/cmdline

command. If the command output does not contain

"pciehp.pciehp_force=1 pci=pcie_bus_perf", you need to configure kernel
parameters.

Figure 3-32

Opening the configuration file

Run the

vi/boot/efi/EFI/redhat/grub.cfg

command. In the command output, find

the sentence that is displayed after the

cat/proc/cmdline

command is executed in

Step 4.a

, and add a space and then "pciehp.pciehp_force=1 pci=pcie_bus_perf" at

the end of the sentence. Do not add the content in a new line.

Figure 3-33

Configuring kernel parameters (1)

Figure 3-34

Configuring kernel parameters (2)

Save the file and restart the compute node.

Run the

cat /proc/cmdline

command. If the command output contains

"pciehp.pciehp_force=1 pci=pcie_bus_perf", the kernel is configured successfully.

FusionServer Pro CH121 V5 Compute Node
User Guide

3 Basic Operations

Issue 06 (2019-08-10)

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands