Huawei FusionServer Pro CH121 V5 User Manual Download Page 56

Page: 56 / 181

Procedure

Step 1

Take the spare part out of its ESD bag.

Step 2

Determine the slot and position of the drive.

For details, see

2.4.1 Drive Configurations

and

2.4.2 Drive Numbering

Figure 3-23

Positions of drives

Step 3

Remove the drive filler.

NOTE

Perform this operation only when a drive filler is installed.

Step 4

Install a drive.

Fully open the ejector lever and push the drive into the slot as far as it will go. See (1) in

Figure 3-24

Ensure that the ejector lever is fastened to the chassis beam, and then close it to
completely insert the drive into the slot. See (2) in

Figure 3-24

FusionServer Pro CH121 V5 Compute Node
User Guide

3 Basic Operations

Issue 06 (2019-08-10)

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands