manualshive.com logo in svg

Huawei FusionServer Pro CH121 V5, User Manual, Page: 88 / 181

Share
Download
Huawei FusionServer Pro CH121 V5 User Manual Download Page 88

The initial password of the iBMC is changed.

----End

4.3.4 Checking the Compute Node

Process

Check the compute node by performing the following operations:

Figure 4-8

 Check process

Procedure

Step 1

Check the indicators on the panels and ensure that the device is working properly.

For details, see 

2.1.2 Indicators and Buttons

.

Step 2

Log in to the MM910 WebUI.

For details, see 

12.3 Logging In to the MM910 WebUI

.

Step 3

Query version information.

1.

On the menu bar, choose 

Chassis Information

.

2.

Click the compute node in the specific slot and choose 

Version Information

 to query

the version information of the compute node.

FusionServer Pro CH121 V5 Compute Node
User Guide

4 Installation and Configuration

Issue 06 (2019-08-10)

Copyright © Huawei Technologies Co., Ltd.

80

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Reviews:

No comments