Huawei FusionServer Pro CH121 V5 User Manual Download Page 119

Page: 119 / 181

Step 2

Remove the compute node.

For details, see

3.3 Removing a CH121 V5

Step 3

Place the compute node on the ESD workstation.

Step 4

Remove the cover.

For details, see

3.5 Removing the Cover

Step 5

Remove the air duct.

For details, see

3.7 Removing the Air Ducts

Step 6

Check whether a PCIe card is installed.

If yes, go to

Step 7

If no, go to

Step 8

Step 7

Remove the PCIe card.

For details, see

3.11 Removing a PCIe Card

Step 8

Take a spare memory module.

Step 9

Check the positions and installation guidelines of the memory modules.

For details, see

2.3.5 Memory Installation Positions

Figure 5-22

Memory slots

Step 10

Install the memory module.

Open the two memory module ejectors on the memory slot.

Figure 5-23

Opening the memory module ejectors

Align the edge connector of the memory module with the alignment key of the memory
slot, and insert the memory module in the slot.

FusionServer Pro CH121 V5 Compute Node
User Guide

5 Optional Part Installation

Issue 06 (2019-08-10)

111

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands