Huawei FusionServer Pro CH121 V5 User Manual Download Page 121

Page: 121 / 181

–

If information about the new memory module is displayed, the replacement is
successful.

–

If information about the original memory module is displayed, access the BIOS and
check memory information.
For details, see

Huawei Server Purley Platform BIOS Parameter Reference

----End

5.2.9 Installing the TPM

Procedure

Step 1

Power off the compute node.

For details, see

3.1 Power-Off Procedure

Step 2

Remove the compute node.

For details, see

3.3 Removing a CH121 V5

Step 3

Place the compute node on the ESD workstation.

Step 4

Remove the cover.

For details, see

3.5 Removing the Cover

Step 5

Take the spare part out of its ESD bag.

Step 6

Determine the position of the TPM.

Figure 5-25

Position of the TPM

Step 7

Install the TPM.

Insert the TPM vertically into the connector on the mainboard. See (1) in

Figure 5-26

FusionServer Pro CH121 V5 Compute Node
User Guide

5 Optional Part Installation

Issue 06 (2019-08-10)

113

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands