Huawei FusionServer Pro CH121 V5 User Manual Download Page 9

Page: 9 / 181

Overview

1.1 Overview

1.2 Physical Structure

1.3 Logical Structure

1.1 Overview

The CH121 V5 is a half-width compute node powered by Intel

Xeon

Scalable processors.

It delivers supreme computing power, large memory capacity, and outstanding scalability.

The CH121 V5 provides dense computing capability and an ultra-large memory. It is
optimized for virtualization, cloud computing, high-performance computing, and compute-
intensive enterprise applications.

The CH121 V5 compute nodes are installed in an E9000 chassis and are centrally managed by
the management module.

FusionServer Pro CH121 V5 Compute Node
User Guide

1 Overview

Issue 06 (2019-08-10)

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands