Huawei FusionServer Pro CH121 V5 User Manual Download Page 29

Page: 29 / 181

to the Base network ports of the switch modules in slots 2X and 3X. The LOM supports Wake
on LAN (WOL) and PXE functions.

Figure 2-15

Connections between the LOM and I/O modules

NOTE

In addition to the LOM, the compute node connects to the Fabric ports of the switch modules
through the network ports on mezzanine cards.

Powering off the compute node forcibly will make the WOL function of the LOM ports invalid.

If flow control is enabled for a LOM port, the switch module connected to the LOM port must also
have flow control enabled.

Table 2-10

I/O modules supported by the LOM

I/O Module

I/O Module
Slot

LOM

Remarks

CX916

2X/3X

√

1E/4E

The LOM cannot communicate
with the I/O modules in slots 1E
and 4E.

CX920

2X/3X

√

1E/4E

The LOM cannot communicate
with the I/O modules in slots 1E
and 4E.

2.6 I/O Expansion

2.6.1 PCIe Cards

The server supports a range of PCIe cards to provide diverse expandability and ease of
peripheral connections.

FusionServer Pro CH121 V5 Compute Node
User Guide

2 Hardware Description

Issue 06 (2019-08-10)

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands