manualshive.com logo in svg

Huawei FusionServer Pro CH121 V5, User Manual, Page: 49 / 181

Share
Download
Huawei FusionServer Pro CH121 V5 User Manual Download Page 49

Figure 3-16

 Installing a PCIe card panel

Step 10

Install the cover.

For details, see 

3.6 Installing the Cover

.

Step 11

Install the compute node.

For details, see 

3.4 Installing a CH121 V5

.

Step 12

Power on the compute node.

For details, see 

3.2 Power-On Procedure

.

----End

3.11 Removing a PCIe Card

Procedure

Step 1

Power off the compute node.

For details, see 

3.1 Power-Off Procedure

.

Step 2

Remove the compute node.

For details, see 

3.3 Removing a CH121 V5

.

Step 3

Place the compute node on the ESD workstation.

Step 4

Remove the cover.

For details, see 

3.5 Removing the Cover

.

Step 5

Remove the air duct.

For details, see 

3.7 Removing the Air Ducts

.

FusionServer Pro CH121 V5 Compute Node
User Guide

3 Basic Operations

Issue 06 (2019-08-10)

Copyright © Huawei Technologies Co., Ltd.

41

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Reviews:

No comments