Huawei FusionDC1000B, Quick Manual

Page: 87 / 122

Default Value Value Range Setting Remarks
R
e
/ / 100
IP address 192.168.0.10
1.0.0.0–
223.255.255.255
Default value
Subnet mask 255.255.255.0
0.0.0.0–
255.255.255.255
Default value
Gateway 192.168.0.1
1.0.0.0–
223.255.255.255
Default value
MAC address / / /
NAT mapping Disable Enable/Disable Disable
Address 1 1–254 Default value
Baud rate 9600
9600, 19200,
115200
Default value
Parity check No No, Odd, Even Default value
Stop bit 1 1–2 Default value
Enable Enable/Disable Enable
Start address 32 32–44 Default value
Quantity 0 0–4 Default value
Start address 16 16–28 Default value
Quantity 0 0–4 Default value
Start address 112 / Default value
Quantity 0 0–12 Default value
SSID
UP Last six characters
of the MAC address
/ Default value
Password Changeme / Default value
Enable Enable/Disable Default value
80 / Default value
Single Single, Parallel Single
/ / 2
0 0–19 0
Normal mode
Normal mode
ECO mode, Self-load mode,
Converter mode
Normal mode
±5%
±5%, ±6%,
±7%, ±8%,
±9%, ±10%
±5%
Non-BSC BSC mode, Non-BSC Non-BSC
ECO voltage range
BSC mode
Working mode
Requisite modules
ModbusTCP Setting
Ambient T/H sensor
WIFI Setting
Single/Parallel
SSH
SmartLi start address
IP Setting
RS485 Setting
Battery temperature sensor
Battery detector
System capacity
Category Parameter
Component ME UPS-A/ME UPS-B/IT UPS-A/IT UPS-B
UPS5000-E-(50kVA–300kVA) Initial Configuration Parameters
Communication
Settings
System Settings
Settings
Advanced Param.