Huawei FusionDC1000B Quick Manual Download Page 4

Page: 4 / 122

Symbol

Description

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to

personal injury.

Supplements the important information in the main

text.
NOTE is used to address information not related to

personal injury, equipment damage, and environment

deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all updates made in previous issues.

Issue 01 (2021-01-05)

This issue is the first official release.

FusionDC1000B Prefabricated Modular Data Center

Quick Guide (2020, Nigeria, Platform Capital

Refinery DC)

About This Document

Issue 01 (2021-01-05)

iii

Summary of Contents for FusionDC1000B



























































































































Search results

Summary of Contents for FusionDC1000B

Reviews:

Related manuals for FusionDC1000B

Brands by name

Popular brands

Huawei FusionDC1000B, Quick Manual

Search results

Summary of Contents for FusionDC1000B

Reviews:

Related manuals for FusionDC1000B

Brands by name

Popular brands