Field
Description
Failover Node
The failover node for the Service Set.
Catalyst Status
The status, which may be Running, Online, Deleting, or Fault. In the unlikely event
that the StoreOnce Catalyst Status displays as
Fault
, contact Hewlett Packard
Enterprise support services for further advice.
IMPORTANT:
When you configure StoreOnce Catalyst, the configuration applies to the selected
Service Set. All stores created on that Service Set have the same configuration settings. Each
Service Set has a Data VIF IP and a StoreOnce Catalyst over Fibre Channel Identifier associated
with it. These values are used when configuring StoreOnce Catalyst stores as backup targets in
your backup application. They are not the same as the VIF used to log in to the StoreOnce
Management Console.
The Data VIF IP for the service set is documented in the GUI for each Service Set on the Navigator
StoreOnce page. Select the Service Set, then look to the System Information in the bottom half of
the page.
Data VIF IP
provides this IP address. The StoreOnce Catalyst over Fibre Channel
Identifier is shown in the StoreOnce Catalyst Fibre Channel Settings tab.
The
Status
tab displays details about:
• StoreOnce Catalyst Status and Protocol Versions
• StoreOnce Catalyst Copy and Data Job Throughput Totals
• Active Sessions
Details refresh every 10 seconds, so this information provides a useful overview of StoreOnce Catalyst
activity on the StoreOnce System. The data displayed on this status page is generally for information
purposes only; do not make inferences based on the values shown.
Table 23: Throughput totals and active sessions
Field
Description
StoreOnce
Catalyst Copy and
Data Job
Throughput Totals
(recent averages)
The left column shows throughput averages for StoreOnce Catalyst Copy and
Data Jobs.
Bandwidth
indicates the actual physical network bandwidth being used.
Throughput
indicates the perceived or logical network bandwidth used (it includes
the efficiency achieved through deduplication). These values are aggregate
numbers (per Service Set, for StoreOnce 6500 and 6600). The throughput
numbers will correlate with the numbers shown on the graphs on the Activity page.
Active Sessions
The right-hand column shows the number of jobs of each type that are running.
Data Jobs Running
shows the number of backup and restore jobs that are
running on the appliance or service set.
Outbound Copy Jobs Running
shows the number of copy jobs running to
another appliance or service set.
Inbound Copy Jobs Running
shows the number of copy jobs coming in from
another appliance or service set.
See
on page 247 for detailed specifications.
78
StoreOnce Catalyst functions
