manualshive.com logo in svg

HPE StoreOnce 6500, User Manual

The HPE StoreOnce 6500 is a cutting-edge data storage solution designed to meet the demanding needs of modern enterprises. It offers high capacity and unmatched performance, ensuring seamless backup and recovery. To unlock its full potential, users can easily access the comprehensive User Manual by visiting our website for free downloads.

Share
Download
background image

The page provides information on the storage and detach capacity. A prompt indicates if you need to
expand the memory to use the maximum supported Cloud Bank capacity.

Cloud Bank page parameters

Field

Description

Name

Cloud Bank storage type, Storage Capacity and Detach Capacity

Licensed

Total amount of Cloud Bank storage capacity that is licensed on the system

Used

Licensed Cloud Bank storage capacity that is currently in use

Unused

Unused licensed Cloud Bank storage capacity

Unlicensed

Remaining unlicensed Cloud Bank storage capacity supported by this system

NOTE: 

You might need a memory expansion kit to utilize the maximum supported Cloud Bank capacity.

See 

Optional hardware 

.

Managing storage configuration

When you have purchased new storage expansions and have connected or installed the disks, use the

Storage Configuration

 tab to provision the storage. To provision your new storage, create RAID volumes

and then expand the file system.

More information

Creating RAID volumes on page 134
Expanding the file system on page 135
Deleting all storage configurations on page 135
Deleting an Alien Volume or an invalid RAID Volume on page 136

Creating RAID volumes

The 

Create Volumes

 button will be active if the following conditions are present:

• There is unconfigured storage present.

• All unconfigured storage is in the 

OK – Blank

 state, or there is some unconfigured storage in the 

OK –

Blank state

 and all other unconfigured storage is in the 

OK – Available for Expansion

 state. (The

storage already has valid RAID volumes configured.)

• Sufficient capacity expansion licenses have been applied for all storage present.

Procedure

1.

Navigate to the 

Storage

 > 

Storage Configuration

 tab.

2.

Click 

Create Volumes

.

A dialog box will appear that states, 

Please Wait — Volume Creation in progress

. Volume creation

will take up to 5 minutes to complete. During this time, no other actions on the 

Storage Configuration

tab will be available. Parity initialization will then take place automatically. When the parity initialization
process completes, the storage expansion status will change to 

OK – Available for Expansion

.

134

 Cloud Bank page parameters

Summary of Contents for StoreOnce 6500



































































































































































































































































Reviews:

No comments

Related manuals for StoreOnce 6500

IBM 610 Technical Overview And Introduction preview
610
Brand: IBM Pages: 40
IBM BladeCenter HS23 Service Manual preview
BladeCenter HS23
Brand: IBM Pages: 36
Far south networks Com.X1 PBX Getting Started preview
Com.X1 PBX
Brand: Far south networks Pages: 4
Video Server 4 Ch Video Sever User Manual preview
4 Ch Video Sever
Brand: Video Server Pages: 34
Supero SUPERSERVER 5014C-MT User Manual preview
SUPERSERVER 5014C-MT
Brand: Supero Pages: 112
IBM BladeCenter PS703 Technical Overview And Introduction preview
BladeCenter PS703
Brand: IBM Pages: 198
Buffalo TERASTATION HS-D1.0TGL/R5 Technical Specifications preview
TERASTATION HS-D1.0TGL/R5
Brand: Buffalo Pages: 2
QNAP TBS-464-8G Quick Installation Manual preview
TBS-464-8G
Brand: QNAP Pages: 16
BITMAIN AntMiner S9 Repair Manual preview
AntMiner S9
Brand: BITMAIN Pages: 20
Nortel CallPilot 1005r Hardware Installation preview
CallPilot 1005r
Brand: Nortel Pages: 74
Nortel Communication Server 100 Manual preview
Communication Server 100
Brand: Nortel Pages: 214
Obvius AcquiLite A7810 Installation And Operation Manual preview
AcquiLite A7810
Brand: Obvius Pages: 29
Multitech TalkAnytime TA2410 User Manual preview
TalkAnytime TA2410
Brand: Multitech Pages: 235
W&T 53641 Manual preview
53641
Brand: W&T Pages: 79
Dell EMC PowerEdge C6525 Installation And Service Manual preview
PowerEdge C6525
Brand: Dell EMC Pages: 99
Dell EMC PowerEdge C4140 Installation And Service Manual preview
PowerEdge C4140
Brand: Dell EMC Pages: 133
QUANTA D51BP-1U User Manual preview
D51BP-1U
Brand: QUANTA Pages: 34
Oracle StorageTek 8 Gb FC PCIe HBA Installation Manual preview
StorageTek 8 Gb FC PCIe HBA
Brand: Oracle Pages: 40

Brands by name

Popular brands

Load more brands